KNOPPIX Terminal Server
Preamble
- This page will be used to document and describe how to boot KNOPPIX off the network using Samba as opposed to NFS.
- The page will pull from several resources to provide an official reference at the KNOPPIX site for all to use.
- Just starting so page will be in progress for a bit and will need to be catagorized.
- You are welcome to contact me on model (I have a day job, so please bare with me see Rjent).
Model
- Most of the this information is an exert from a paper on the model at http://www.mgr3.k12.mo.us/~rjn103s/HybridNotes-20060504-1.pdf
The methodology for the hybrid environment uses a Common Internet File System (CIFS) to boot up KNOPPIX. The base work for this model utilizes existing resources and information from http://knoppix.manty.net . The setup information provided here assumes you have PXE booting via TFTP already setup on the boot server. The rest is as follows:
- KNOPPIX:
Download KNOPPIX 4.0.2 and burn to a CD. Download the miniroot.gz and integrate for the pxe bootup.
To do this, place the miniroot.gz in the /tftpboot/hybrid/pxeboot/ directory.
Make a directory under /tftpboot/hybrid/pxeboot/ called knoppix and copy the /boot/isolinux/linux file from the KNOPPIX CD to /tftpboot/hybrid/pxeboot/ knoppix/ Copy the KNOPPIX folder from the KNOPPIX CD to a location on server of /hybrid/knoppixshare Modify the pxe boot menu located at /tftpboot/hybrid/pxeboot/ pxelinux.cfg with the below addition: LABEL CIFS KNOPPIX KERNEL knoppix/linux APPEND secure nfsdir=//xxx.xxx.xxx.xxx/knoppix_share nodhcp lang=en ramdisk_size=100000 init=/etc/init apm=poweroff nomce vga=791 initrd=miniroot.gz quiet BOOT_IMAGE=knoppix Note: xxx.xxx.xxx.xxx is the IP address of the server running the samba share. • Samba 7 of 16 Samba provides the CIFS services, so we setup a share on server xxx.xxx.xxx.xxx . An example smb.conf is listed below: [global] workgroup = HYBRIDGROUP netbios name = HYBRIDSERVER security = share guest account = nobody [knoppix_share] comment = Knoppix Boot Data path = /hybrid/knoppix_share read only = Yes guest ok = Yes Restart samba services. • DHCP Services Example entry for dhcpd.conf below group { filename "hybrid/pxeboot/ pxelinux.0"; host hybrid51 { hardware ethernet MA:CA:DD:RE:SS:ED; fixedaddress xxx.xxx.xxx.xxx; } } Restart or reload dhcp services. At this point, you should be ready to test boot your KNOPPIX session.
References
- The KNOPPIX® terminal server over SMB/CIFS page - The place where all the starting work was derived.