|
|
| (One intermediate revision by the same user not shown) |
| Line 1: |
Line 1: |
| − | = [[debian-knoppix]] Starting SSH and Samba with floppyconfig =
| + | {{delete|out of date}} [[User:Werner P. Schulz|Werner P. Schulz]] 12:13, 6 January 2013 (MST) |
| − | From:
| + | |
| − | Chris Liechti <cliechti>
| + | |
| − | | + | |
| − | = Problem =
| + | |
| − | | + | |
| − | I recently ran into a little problem: i wanted to copy away data from a PC without screen and keyboard, but knoppix needs these two...
| + | |
| − | | + | |
| − | = Solution =
| + | |
| − | | + | |
| − | Make a bootfloppy with a knoppix.sh script on it that sets the passwords and starts the servers. so what you find here is the result of these efforts.
| + | |
| − | | + | |
| − | to use them, create a knoppix bootfloppy and copy these two on it. Optionaly use the "hostname", "password" and/or "ip" boot options (see comments in knoppix.sh for more information)
| + | |
| − | | + | |
| − | knopper: maybe are the "hostname" and "ip" kernel cmd line options also useful for the normal knoppix-autoconfigure? btw i did not see where the ip/nm/gw options are used in knoppix-terminalserver... they are assigned to variables but never used?!? "hostname" could be useful in case somebody wants to start several knoppix machines with servers (apache, samba, etc)
| + | |
| − | | + | |
| − | have fun
| + | |
| − | | + | |
| − | chris
| + | |
| − | | + | |
| − | = Code =
| + | |
| − | | + | |
| − | Please watch out for the pre tags around each of the code segments. Do not copy these wiki tags. You will want to adjust the APPEND settings for your hardware setup.
| + | |
| − | | + | |
| − | == syslinux Settings ==
| + | |
| − | | + | |
| − | <pre>
| + | |
| − | DEFAULT vmlinuz
| + | |
| − | APPEND ramdisk''size=100000 init=/etc/init lang=ch apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi
| + | |
| − | hdf=scsi hdg=scsi hdh=scsi vga=normal initrd=miniroot.gz nomce quiet
| + | |
| − | BOOT''IMAGE=knoppix floppyconfig 2 TIMEOUT 50
| + | |
| − |
| + | |
| − | PROMPT 1
| + | |
| − | DISPLAY boot.msg
| + | |
| − | F1 boot.msg
| + | |
| − | F2 f2
| + | |
| − | LABEL knoppix
| + | |
| − | KERNEL vmlinuz
| + | |
| − | APPEND ramdisk''size=100000 init=/etc/init lang=ch apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi
| + | |
| − | hdf=scsi hdg=scsi hdh=scsi vga=normal initrd=miniroot.gz nomce quiet
| + | |
| − | BOOT''IMAGE=knoppix floppyconfig 2
| + | |
| − | </pre>
| + | |
| − | | + | |
| − | == knoppix.sh ==
| + | |
| − | | + | |
| − | There are special symbols in the knoppix.sh code that follows. The little characters that kind-of look like dice are the escape character, ASCII 27. They could not be rendered correctly by wiki. However, you need to make sure that these are copied properly for the script to work correctly. As with the syslinux section of this page, please watch out for the pre tags around the following code segment. Do not copy these wiki tags.
| + | |
| − | | + | |
| − | <pre>
| + | |
| − | #!/bin/sh
| + | |
| − | # Start SSH and Samba servers.
| + | |
| − | #
| + | |
| − | # This script can be used on a floppy (bootsflopyp + floppyconfig) to start a
| + | |
| − | # server without touching the keyboard. The parameters can be given on the
| + | |
| − | # boot cmd line. The intention is that you can use this to rescue data from
| + | |
| − | # a PC over the network and that box does not even need to have a minitor or
| + | |
| − | # keyboard, just a Knoppix CD and this script on a floppy is used.
| + | |
| − | #
| + | |
| − | # Installation
| + | |
| − | # 1. Create a bootfloppy "cat /cdrom/KNOPPIX/boot.img >/dev/fd0" on Knoppix
| + | |
| − | # 2. Copy this file to te floppy, name must be "knoppix.sh"
| + | |
| − | # 3. Edit syslinux.cfg and append "floppyconfig 2" to all the "APPEND" lines.
| + | |
| − | # 4. Optionaly add "ip", "hostname" or "password" to the "APPEND" lines too
| + | |
| − | # 5. Try i out by booting this floppy with Knoppix CD in the CDROM
| + | |
| − | #
| + | |
| − | # Security advice
| + | |
| − | # The default passowrd is "secret". It should be overriden with the
| + | |
| − | # "password" option. but still then it's a default password. Default
| + | |
| − | # passwords are always bad... and insecure.
| + | |
| − | # The Knoppix home is exported read/write over Samba and the /mnt dir
| + | |
| − | # is accessible. Somebody with the password could fill the ramdisks or
| + | |
| − | # access the mounted partitions.
| + | |
| − | # Because of these limitations, you should not use this script on machines
| + | |
| − | # with internet connection. This script is intended for experienced users
| + | |
| − | # only.
| + | |
| − | #
| + | |
| − | # Samba is started for two reasons:
| + | |
| − | # - Easily copy files to a Windows or Linux machine.
| + | |
| − | # - Use "nmblookup Knoppix" to discover the machine from a remote computer,
| + | |
| − | # which is useful if the server started with DHCp and no monitor...
| + | |
| − | # And the host is found by Windows machines with the name "\\Knoppix".
| + | |
| − | #
| + | |
| − | # SSH is started so that one can login and mount drives, start NFS exports,
| + | |
| − | # whatever needed.
| + | |
| − | #
| + | |
| − | # Kernel command line parameters used:
| + | |
| − | # ip=x.x.x.x use static IP instead of DHCP, may also use "nodhcp"
| + | |
| − | # password=x use given password instead of "secret"
| + | |
| − | # hostname=x use given hostname instead of "Knoppix"
| + | |
| − | #
| + | |
| − | # Tips and tricks:
| + | |
| − | # - Start your VNC desktop with "vncserver -geometry 800x600". Don't start it
| + | |
| − | # as root but as knoppix user because of the ramdisks size.
| + | |
| − | # - Change syslinux.cfg on the bootfloppy so that it ony starts to textmode
| + | |
| − | # and make sure that it runs "floppyconfig". This means appending
| + | |
| − | # "floppyconfig 2" to the "APPEND" lines(s)
| + | |
| − | # - Always supply your own "password".
| + | |
| − | #
| + | |
| − | # DISCLAIMER
| + | |
| − | # ----------
| + | |
| − | # THIS IS EXPERIMENTAL SOFTWARE. USE AT YOUR OWN RISK. THE AUTHORS CAN
| + | |
| − | # NOT BE HELD LIABLE UNDER ANY CIRCUMSTANCES FOR DAMAGE TO HARDWARE OR
| + | |
| − | # SOFTWARE, LOST DATA, OR OTHER DIRECT OR INDIRECT DAMAGE RESULTING FROM
| + | |
| − | # THE USE OF THIS SOFTWARE. IF YOU DO NOT AGREE TO THESE CONDITIONS, YOU
| + | |
| − | # ARE NOT PERMITTED TO USE OR FURTHER DISTRIBUTE THIS SOFTWARE.
| + | |
| − | #
| + | |
| − | # BSD license
| + | |
| − | # (C) 2003 Chris Liechti <cliechti@gmx.net>
| + | |
| − |
| + | |
| − | [[ "`id -u`" = "0" ]] || { echo "You need root privileges to modify the system!" >&2 ; exit 1; }
| + | |
| − |
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | # ANSI COLORS
| + | |
| − | CRE="
| + | |
| − | �[K"
| + | |
| − | NORMAL="�[0;39m"
| + | |
| − | # RED: Failure or error message
| + | |
| − | RED="�[1;31m"
| + | |
| − | # GREEN: Success message
| + | |
| − | GREEN="�[1;32m"
| + | |
| − | # YELLOW: Descriptions
| + | |
| − | YELLOW="�[1;33m"
| + | |
| − | # BLUE: System messages
| + | |
| − | BLUE="�[1;34m"
| + | |
| − | # MAGENTA: Found devices or drivers
| + | |
| − | MAGENTA="�[1;35m"
| + | |
| − | # CYAN: Questions
| + | |
| − | CYAN="�[1;36m"
| + | |
| − | # BOLD WHITE: Hint
| + | |
| − | WHITE="�[1;37m"
| + | |
| − |
| + | |
| − | # get the kernel command line
| + | |
| − | CMDLINE="$(cat /proc/cmdline)"
| + | |
| − |
| + | |
| − | # some functions borrowed from knoppix-autoconfig
| + | |
| − |
| + | |
| − | stringinstring()
| + | |
| − | {
| + | |
| − | : case "$2" in '''$1''') return 0;; esac
| + | |
| − | : return 1
| + | |
| − | }
| + | |
| − |
| + | |
| − | getbootparam()
| + | |
| − | {
| + | |
| − | : stringinstring "$1=" "$CMDLINE" || return 1
| + | |
| − | : result="${CMDLINE##*$1=}"
| + | |
| − | : result="${result%%[[ ]]*}"
| + | |
| − | : echo "$result"
| + | |
| − | : return 0
| + | |
| − | }
| + | |
| − |
| + | |
| − |
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | #password should be supplied on kernel command line
| + | |
| − | PASSWORD="`getbootparam password`"
| + | |
| − |
| + | |
| − | #if no password is given, do a stupid thing, use a default.. and print a warning
| + | |
| − | if [[ -z "$PASSWORD" ]]; then
| + | |
| − | : echo "${RED}WARNING: Using default password \"secret\"!${NORMAL}"
| + | |
| − | : echo "This is verry insecure. Use \"knoppix password=xx\" as boot parameter"
| + | |
| − | : PASSWORD="secret"
| + | |
| − | fi
| + | |
| − |
| + | |
| − | #change password
| + | |
| − | echo "knoppix:$PASSWORD" | chpasswd
| + | |
| − |
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | #check if ip number is given
| + | |
| − | IP="`getbootparam ip`"
| + | |
| − | #if ip is given, set up eth0 appropiately
| + | |
| − | [[ -n "$IP" ]] && ifconfig eth0 $IP
| + | |
| − |
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | #check if hostname number is given
| + | |
| − | NEW_HOSTANME="`getbootparam hostname`"
| + | |
| − | #if hostname is given use it
| + | |
| − | if [[ -n "$NEW_HOSTANME" ]]; then
| + | |
| − | : hostname $NEW_HOSTANME
| + | |
| − | : rm -f /etc/hostname /etc/mailname /etc/hosts
| + | |
| − | : echo "$NEW_HOSTANME" >/etc/hostname
| + | |
| − | : echo "$NEW_HOSTANME" >/etc/mailname
| + | |
| − | : cat /KNOPPIX/etc/hosts|sed s/Knoppix/$NEW_HOSTANME/ >/etc/hosts
| + | |
| − | fi
| + | |
| − |
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | #configure samba
| + | |
| − | #passwords must be a file, not a link
| + | |
| − | rm -f /etc/samba/smbpasswd
| + | |
| − | cp -a /KNOPPIX/etc/samba/smbpasswd /etc/samba/smbpasswd
| + | |
| − | #set password for user knoppix
| + | |
| − | echo -e "$PASSWORD\n$PASSWORD"|smbpasswd -a knoppix -s
| + | |
| − | #update samba config, make home writeable
| + | |
| − | rm -f /etc/samba/smb.conf
| + | |
| − | cat /KNOPPIX/etc/samba/smb.conf|sed "s/read only = yes/read only = no/" >/etc/samba/smb.conf
| + | |
| − | #make mounts accessible, but the partitions need to be mounted maually...
| + | |
| − | ln -s /mnt /home/knoppix/mnt
| + | |
| − |
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | # Start servers
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | #~ echo "${BLUE}Starting SSH and Samba server...${NORMAL}"
| + | |
| − | /etc/init.d/ssh start
| + | |
| − | /etc/init.d/samba start
| + | |
| − |
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | # display short info with ip numbers of this machine
| + | |
| − | # - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
| + | |
| − | echo "${BLUE}Server listening on:${GREEN}"
| + | |
| − | /sbin/ifconfig|grep inet|cut -d " " -f 12
| + | |
| − | echo "${NORMAL}"
| + | |
| − | echo "${BLUE}Hostname is: ${GREEN}$('hostname')${NORMAL}"
| + | |
| − |
| + | |
| − | # two beeps for those w/o monitor
| + | |
| − | echo -ne "\007" >/dev/tty1 ; usleep 200000
| + | |
| − | echo -ne "\007" >/dev/tty1
| + | |
| − | </pre>
| + | |
| − | | + | |
| − | [[Category:Useful knoppix Commands]]
| + | |
