Category:Hard drive Installation


From Knoppix Documentation Wiki
Jump to: navigation, search

The main strength of Knoppix is its ability to be run from memory as a Live Linux CD. To boot the CD/DVD Isolinux is used. The advantage to this is that you can take the CD/DVD with you. However, it is possible to install Knoppix on other mediums.

Flash disk Install

Boot with Knoppix CD/DVD and select 'Knoppix/ Install KNOPPIX to flash disk'. You will get an installation of compressed filesysten Image and the Overlay to '/dev/sda1' (FAT32 formatted).

Now you can also boot with Knoppix CD/DVD and select 'Knoppix/ Install KNOPPIX to flash disk (experimental version)'. You will get an installation of compressed filesystem Image to '/dev/sda1' (FAT32 formatted) and the Overlay to '/dev/sda2' (ReiserFS formatted).

Both these installations uses Syslinux to boot. At the end of installation, otherwise while booting your flash disk you'll be asked to create persistent memory (encrypted or not).

Flash disk Install to HD

You can use 'Knoppix/ Install KNOPPIX to flash disk' and do the installation not on an flash device but on a (external) hard drive.

Poor man's install

In earlier days there have been many descriptions how to copy the compressed Knoppix filesystem to hard drive, how to boot these installations and they have been called like poor man's install, PMI, poor man's install to HD, basic poor man's install ...

Nowadays you can do it as follows: Boot with the Knoppix-CD/DVD using the cheatcode

knoppix tohd=/dev/sda1

Knoppix will create a folder called "KNOPPIX" in the partition you chose and you will be asked to create persistent memory. The used disk partition can be a Linux format such as EXT3 but can also be FAT32 or NTFS (pre Windows 8).

To boot this poor man's install you need again a Knoppix CD/DVD or a boot-only Knoppix-CD with the same Kernel version; at boot prompt type:

knoppix fromhd=/dev/sda1

Otherwise if you are using GRUB as bootloader, copy the kernel and initramfs to the hard drive

cp /mnt-system/boot/isolinux/linux /mnt-system/isolinux/minirt.gz \
/media/sda1/KNOPPIX/

and create an entry within '/boot/grub/menu.lst' (GRUB legacy)

title Knoppix
kernel (hd0,0)/KNOPPIX/linux (.. other boot-parameter ..)
initrd (hd0,0)/KNOPPIX/minirt.gz

or edit '/etc/grub.d/40_custom' (GRUB 2)

menuentry "Knoppix" {
set root=(hd0,1)
linux /KNOPPIX/linux (.. other boot-parameter ..)
initrd (KNOPPIX/minirt.gz
}

to boot the Knoppix installation. Instead of "(.. other boot-parameter ..)" use the parameters as you need or as you can see in the "APPEND"-lines of '/mnt-system/boot/isolinux/isolinux.cfg'.

Important note:"sda1" is only as an example; use your own value! "(hd0,0)" means first hard drive and first partition if you use GRUB legacy; with GRUB 2 take "(hd0,1)" for first hard drive and first partition.

HD Install

Boot with Knoppix CD/DVD and select 'Knoppix/ KNOPPIX HD install' in a free partiton you chose. You will get a Debian-style installation in your partiton (ReiserFS formatted) and the option to use GRUB legacy as bootmanager.

Persistent memory

This is one of the most useful features in Knoppix, and together with unionfs, makes Knoppix very versatile indeed. The entire unionfs can be saved, so that configuration changes, settings, user data, packages which have been downloaded and installed etc can all be saved and will be available at subsequent sessions.

With "Flash disk Install" you will be asked to create persistent memory. A image file '/KNOPPIX/knoppix-data.img' will be created respectively '/KNOPPIX/knoppix-data.aes' in case of encryption. At the next boot, Knoppix will scan for any image file named knoppix-data.img or knoppix-data.aes.

With the experimental version of "Flash disk Install" you can also create persistent memory (encrypted or not), now in a separate partition '/dev/sda2' and without the limitation of maximum size of 4 GB for persistent memory.

UNIONFS

One of the limitations of a Live CD is that most of the system area is read-only – in particular, /usr where most executable programs are kept. Some programs can run from /home, which is writable, but many programs need to change and access components into standard locations like /lib or /usr/lib are read-only. Fortunately there are solutions.

Unionfs is another important development introduced into Knoppix from Version 3.8 onwards. Unionfs is a virtual filesystem. It creates a writable system file area in ram with all the system directories such as /etc /usr and so on. This is then seamlessly merged with the read-only system files on the CD. A very readable description of unionfs can be found here: Kyle Rankin on unionfs

With unionfs, it becomes possible to "write" to the system area. Knoppix can then be treated almost like it is installed on a writable media. You can do install programs with apt-get or synaptic, download and install .deb packages, compile and install new drivers, edit config files in /etc and so on.

Of course, you may still download an incompatible package which upsets Knoppix's delicate balance and break Knoppix, just like in a hard disk install. But this is a Live CD! The problems go away at the next reboot.

On the other hand, if you installed something which works well, you will not have to do it again. You can save it and it can be made available at the next session – see below.


If you decide to do a HD installation of Knoppix, please read HD Install Warning not to do it first.

Return to Main Page of the Wiki

Pages in category "Hard drive Installation"

The following 3 pages are in this category, out of 3 total.