Bugs/5.3.1DVD

• I was wrong: the Knoppix 5.3.1 Terminal Server does work: cf: http://s94002264.onlinehome.us/grub/pxe531.jpg

2008.04.24 - Touchpad very slow!!! 1st off thanks to everyone who contributed to knoppix. On to the matter at hand. Same laptops running > =5.1 were used as reference. Temporary solution: edit /etc/X11/xorg.conf

# to find touchpad 
$python /usr/bin/hal-device-manager
# found alps glidepoint on /dev/input/event3
# edit /etc/X11/xorg.conf 
$sudo vi /etc/X11/xorg.conf
# insert the following 
        InputDevice "AlpsGlide" "SendCoreEvents"
Section "InputDevice"
        Driver          "synaptics"
        Identifier      "AlpsGlide"
        Option          "Device"                "/dev/input/event3"
        Option          "Protocol"              "auto-dev"
        Option          "LeftEdge"              "130"
        Option          "RightEdge"             "840"
        Option          "TopEdge"               "130"
        Option          "BottomEdge"            "640"
        Option          "FingerLow"             "7"
        Option          "FingerHigh"            "8"
        Option          "MaxTapTime"            "180"
        Option          "MaxTapMove"            "110"
        Option          "EmulateMidButtonTime"  "75"
        Option          "VertScrollDelta"       "20"
        Option          "HorizScrollDelta"      "20"
        Option          "MinSpeed"              "0.60"
        Option          "MaxSpeed"              "1.10"
        Option          "AccelFactor"           "0.030"
        Option          "EdgeMotionMinSpeed"    "200"
        Option          "EdgeMotionMaxSpeed"    "200"
        Option          "UpDownScrolling"       "1"
        Option          "CircularScrolling"     "1"
        Option          "CircScrollDelta"       "0.1"
        Option          "CircScrollTrigger"     "2"
        Option          "SHMConfig"             "on"
        Option          "Emulate3Buttons"       "on"
EndSection