|
|
(8 intermediate revisions by 5 users not shown) |
Line 1: |
Line 1: |
− | 1.) Reported by Mkurz
| + | {{delete|outdated}} [[User:WPSchulz|WPSchulz]] ([[User talk:WPSchulz|talk]]) 19:09, 11 April 2016 (EDT) |
− | | + | |
− | The "Start Samba Server" does not create proper shares. The script /usr/sbin/sambastart does not write a correct /etc/samba/smb.conf file. It has worked in Version till 4.02, but with 5.0 it does not.
| + | |
− | | + | |
− | 2.) Reported by phil42
| + | |
− |
| + | |
− | UPDATE: This is not a bug. Previous behavior can be restored with a KDE panel configuration change.
| + | |
− |
| + | |
− | If the panel is moved to the top of the screen, hidden, and the panel-hiding buttons are removed, it does not reappear when the pointer moves to the top of the screen.
| + | |
− | | + | |
− | 3.) Reported by Jackobli
| + | |
− | | + | |
− | Seems that the persistant homedir does not work properly. I can create a persistant home on my USB-Stick. But the home will not be loaded on the next boot (home=/dev/sda1).
| + | |
− | --[[User:Jackobli|Jackobli]] 00:37, 21 Mar 2006 (GMT)
| + | |
− | | + | |
− | 4.) Reported by jab (jeff@jab.org)
| + | |
− | | + | |
− | Radeon xorg driver does not work with Dell 2405FPW monitor and radeon 9250 card; when X starts the screen goes blank and is unrecoverable (alt-backspace and ctrl-alt-f2 do nothing). This worked fine in knoppix 4.0.2 and xfree86. I can use the vesa driver (knoppix lang=us xmodule=vesa) but that really limits my screen resolution.
| + | |
− | | + | |
− | 5.) Reported by MrMoor
| + | |
− | | + | |
− | "knoppix bootfrom=/dev/hdc3/KNOPPIX_V5*.iso" does not work. During boot I get:
| + | |
− | | + | |
− | Accessing KNOPPIX DVD at /cdrom2.loop/KNOPPIX_V5*.iso...ERROR: Module cloop is in use
| + | |
− | umount: Device or resource is busy
| + | |
− | insmod: error inserting '/cdrom/boot/modules/cloop.ko': -1 File exists
| + | |
− | insmod: can't read '/modules/cloop.ko': no such file or directory
| + | |
− | Found primary KNOPPIX compressed image at /cdrom2/KNOPPIX/KNOPPIX.
| + | |
− | ioctl: LOOP_SET_FD: Device or resource busy
| + | |
− | | + | |
− | and it continues to boot from DVD. hdc3/KNOPPIX_V5.0DVD-2006-02-25-EN.iso is -rwxr-xr-x KNOPPIX:KNOPPIX on ext3.
| + | |
− | | + | |
− | 6.) Reported by mkrufky (mkrufky at linuxtv dot org)
| + | |
− | | + | |
− | Unable to mount Compact Flash drives connected via an IDE interface. This worked in all Knoppix versions 3.8 through 4.0.2, I have not tried in versions earlier than 3.8.
| + | |
− | | + | |
− | 7.) Reported by mkrufky (mkrufky at linuxtv dot org)
| + | |
− | | + | |
− | Missing hybrid v4l/dvb kernel modules: cx88-dvb, saa7134-dvb, but their dependencies are all present. This causes bugs in the cx88 driver (loud static on startup), due to some missing init code that should run in the missing cx88-dvb module. Of course, the lack of these modules also prevents DVB operation for those devices.
| + | |
− | | + | |
− | | + | |
− | 8) burn successfully KNOPPIX_V5.0.1CD-2006-06-01-EN on a CD, and Knoppix V5.0 tested successfully on different machines, but cannot boot on my laptop "HP Pavilion 5000".
| + | |
− | error description:
| + | |
− | ''enabling DMA accelerator for the hdc [HL-DT-ST GSA-4082N]
| + | |
− | looking for CD in: /dev/hdc''
| + | |
− | | + | |
− | and after 3 minutes stuck, that message appear at the screen :
| + | |
− | ''can't find KNOPPIX filesystem, sorry, dropping you to a (very limited) shell...''
| + | |
− | and a shell prompt knoppix appear...
| + | |
− | | + | |
− | 9) Reported by StuartCook
| + | |
− | | + | |
− | "Start Samba Server" share creation failure (see 1 above) in 5.0 and 5.0.1.
| + | |
− | | + | |
− | Workaround: Edit /usr/sbin/sambastart, near the bottom, replace /mnt by /media
| + | |
− | | + | |
− | Now "Start Samba Server" should create disk shares correctly.
| + | |
− | | + | |
− | If this is the wrong place for this workaround; apologies.
| + | |
− | | + | |
− | | + | |
− | | + | |
− | 10) Reported by Greg M. Johnson
| + | |
− | | + | |
− | 5.01 as live CD works well with USB pen drives. A HDD install of 5.01 does not. I noted that you create the exact same fstab, whether it be live or installed. And that's the bug! :). The UID for /sda1 that you put into fstab is "knoppix" in both cases. For a live boot, this is correct. For a HDD install the UID ain't 'knoppix' unless the user has created a userid of that name.
| + | |
− | WORKAROUND: if one creates a userid of "knoppix" on the system, it works.
| + | |
− | | + | |
− | | + | |
− | 11) Reported by Mark Rice | + | |
− | | + | |
− | Intel Wireless (2200 bg) does not work on IBM T42. It worked great with Knoppix 4.02. ipw2200 and related modules show up with lsmod. iwconfig shows no wirelss adaptores.
| + | |
− | | + | |
− | | + | |
− | 12) Reported by Greg Powers
| + | |
− | | + | |
− | Saved a config using Knoppix 4 to a USB drive. Booted with Knoppix 5.0.1 (CD) with myconf=scan. Works. Most things do work. Great system. However, when try to save config again it only lists the floppy as a destination option. Can't save to USB key. Maybe change from /mnt to /media was missed in some file somewhere? Silly change, btw. Sorry.
| + | |
− | | + | |
− | | + | |
− | 13) Reported by Richard Earhart
| + | |
− | | + | |
− | For Knoppix 5.0.1 both DVD and CD
| + | |
− | 1. Several different routers correctly configured several different net chips with DHCP in previous versions and are no longer doing so.
| + | |
− | 2. There is a problem with hardware detection, specifically: NO /proc/pci which exists in previous versions.
| + | |
− | 3. Intel and 3COM network chips that worked in previous versions are not being properly detected or configured.
| + | |
− | See http://www.knoppix.net/forum/ (Networking) 5.0.1 (2006-06-01) DVD and networking for details.
| + | |
− | | + | |
− | 14) Reported by Greg M. Johnson
| + | |
− | | + | |
− | For the live boot of DVD of 5.0.1-DVD, everything works great with multimedia. With a HDD install of 5.0.1, I cannot get a peep of sound out of this system. An error message upon loading is
| + | |
− | "Sound server informational message:
| + | |
− | Error while initializing the sound driver:
| + | |
− | device /dev/dsp can't be opened (Permission denied)."
| + | |
− | I've tried alsaconf a half dozen times to no avail. Given the error (bug #10) above, and the similar live/install dichotomy, my hypothesis is that this is a problem with the installer or the distro.
| + | |