From Knoppix Documentation Wiki
Revision as of 21:43, 19 October 2005 by Sjmac (Talk | contribs)

Jump to: navigation, search

1.) Reported by: pawel

proteon.ko and skisa.ko produces "segmentation fault" on boot if all available network modules are integrated into miniroot.gz

2.) Reported by: Freebooter

The 4.0.2 DVD if F3 is pressed at boot opens a window which says: knoppix toram Load entire CD to ramdisk (1GB)


3.) Reported by: Ethereal

It seems that the number of captured Packets/Second in Ethereal, never returns to 0, but continues to grow over time. You will see this behavior by running Ethereal of the 4.0.2 DVD and clicking in the menu bar on: Capture -> Interfaces... In the previous release of Knoppix 4.0 DVD the Ethereal app seems to work fine and the number will return to 0 as you would expect.

4.) Reported by SJMac

I have a USB key with 2 partitions. In Knoppix they are /dev/sdb1 (ext2) and /dev/sdb2 (vfat).

I "save Knoppix configuration" in to /mnt/sdb1 and it is found on a reboot if I use myconfig=scan. If I create a "persistent Knoppix disk image" in /dev/sdb1, then it is never used, even if I specify home=/dev/sdb1 or home=scan at boot.

If I create the persistent disk image in the vfat partition, then it is detected at startup (no command line option required).

Maybe this is just because I have the config and the persistant HDD file on the same partition: http://www.knoppix.net/wiki/Using_FAQ#Q:_Knoppix_3.2:_Errormessage_during_booting.2C_when_HOME-Directory_is_saved_on_HD.3F