Difference between revisions of "Bugs/4.0.2DVD"


From Knoppix Documentation Wiki
Jump to: navigation, search
Line 19: Line 19:
 
to work fine and the number will return to 0 as you would expect.
 
to work fine and the number will return to 0 as you would expect.
  
4.) Reported by SJMac
+
4.) Reported by SJMac: Config and Persistent HD conflict?
  
 
I have a USB key with 2 partitions. In Knoppix they are /dev/sdb1 (ext2) and /dev/sdb2 (vfat).
 
I have a USB key with 2 partitions. In Knoppix they are /dev/sdb1 (ext2) and /dev/sdb2 (vfat).
Line 27: Line 27:
 
If I create the persistent disk image in the vfat partition, then it is detected at startup (no command line option required).
 
If I create the persistent disk image in the vfat partition, then it is detected at startup (no command line option required).
  
Maybe this is just because I have the config and the persistant HDD file on the same partition: http://www.knoppix.net/wiki/Using_FAQ#Q:_Knoppix_3.2:_Errormessage_during_booting.2C_when_HOME-Directory_is_saved_on_HD.3F
+
Maybe I cannot have a config config and persistent HDD file on the same partition? Also see http://www.knoppix.net/wiki/Using_FAQ#Q:_Knoppix_3.2:_Errormessage_during_booting.2C_when_HOME-Directory_is_saved_on_HD.3F
 +
 
 +
5.) Reported by SJMac: Nothing is Saved to my Persistent HD Until I reboot
 +
 
 +
Nothing is saved to a persistent HD image until the image is found after a reboot. Is this intentional, as it doesn't seem to be mentioned in the UI?
 +
 
 +
6.) Reported by SJMac: Custom Config is obseleted by Persistent HD Image.
 +
 
 +
It is not mentioned anywhere that Custom Configuration is not necessary if a persistent HD image is used.

Revision as of 22:21, 19 October 2005

1.) Reported by: pawel

proteon.ko and skisa.ko produces "segmentation fault" on boot if all available network modules are integrated into miniroot.gz

2.) Reported by: Freebooter

The 4.0.2 DVD if F3 is pressed at boot opens a window which says: knoppix toram Load entire CD to ramdisk (1GB)

THIS IS THE DVD AND NOT THE CD AS IT DISPLAYS!

3.) Reported by: Ethereal

It seems that the number of captured Packets/Second in Ethereal, never returns to 0, but continues to grow over time. You will see this behavior by running Ethereal of the 4.0.2 DVD and clicking in the menu bar on: Capture -> Interfaces... In the previous release of Knoppix 4.0 DVD the Ethereal app seems to work fine and the number will return to 0 as you would expect.

4.) Reported by SJMac: Config and Persistent HD conflict?

I have a USB key with 2 partitions. In Knoppix they are /dev/sdb1 (ext2) and /dev/sdb2 (vfat).

I "save Knoppix configuration" in to /mnt/sdb1 and it is found on a reboot if I use myconfig=scan. If I create a "persistent Knoppix disk image" in /dev/sdb1, then it is never used, even if I specify home=/dev/sdb1 or home=scan at boot.

If I create the persistent disk image in the vfat partition, then it is detected at startup (no command line option required).

Maybe I cannot have a config config and persistent HDD file on the same partition? Also see http://www.knoppix.net/wiki/Using_FAQ#Q:_Knoppix_3.2:_Errormessage_during_booting.2C_when_HOME-Directory_is_saved_on_HD.3F

5.) Reported by SJMac: Nothing is Saved to my Persistent HD Until I reboot

Nothing is saved to a persistent HD image until the image is found after a reboot. Is this intentional, as it doesn't seem to be mentioned in the UI?

6.) Reported by SJMac: Custom Config is obseleted by Persistent HD Image.

It is not mentioned anywhere that Custom Configuration is not necessary if a persistent HD image is used.