Difference between revisions of "Bugs/3.8.1"


From Knoppix Documentation Wiki
Jump to: navigation, search
 
(First bug?)
Line 1: Line 1:
 
List V3.8.1 bugs here
 
List V3.8.1 bugs here
  
* no bugs as yet :)
+
1. No USB keyboard support on Dell Optiplex GX280.
 +
Some hardware details:
 +
  * USB Keyboard: Happens to be a Danish keyboard, shouldn't matter.
 +
  * USB Mouse
 +
* Pentium 4
 +
* SATA hard drive
 +
 
 +
symptons:
 +
* Keyboard works at the "KNOPPIX: " boot promt, anything after that it doesn't
 +
* above the "Welcome to KNOPPIX... (etc)" white text line, you have:
 +
    1. image of tux
 +
    2. audit(somenumber.???:?)
 +
    3. ata2: disabling port
 +
  it's that 3rd line that perplexes me.
 +
* Hangs 30 seconds into booting, immediately after message: "2.78 Knoppix booting"
 +
* It seems it never detects anything USB (though the USB mouse kinda works later...)
 +
* booting "debug" asks to type exit to continue... nothing responds on the keyboard
 +
* booting "failsafe" makes it all the way to KDE where the mouse (mostly) works, but the keyboard does not.
 +
* booting "expert" fails when it needs KB input to select SCSI drivers.
 +
* booting the {nousb|nousb2|lang=da} all fail.
 +
* booting "knoppix testcd" fails similarly
 +
* booting "failsafe testcd" tests the CD and makes it into KDE as prev. mentioned (though the output of the md5sums was not fully observed, i.e. bathroom break) (bad burn is doubtful, the iso DL is good (as checked by sha1))
 +
 
 +
ideas:
 +
* ?? I've tried a lot of tweaking and some searching, anyone experiencing similar issues?
 +
 
 +
* no bugs as yet :) - hate to rain in your parade ;-)

Revision as of 16:45, 11 April 2005

List V3.8.1 bugs here

1. No USB keyboard support on Dell Optiplex GX280. Some hardware details:

 * USB Keyboard: Happens to be a Danish keyboard, shouldn't matter.
 * USB Mouse
* Pentium 4
* SATA hard drive

symptons:

* Keyboard works at the "KNOPPIX: " boot promt, anything after that it doesn't
* above the "Welcome to KNOPPIX... (etc)" white text line, you have:
    1. image of tux
    2. audit(somenumber.???:?)
    3. ata2: disabling port
  it's that 3rd line that perplexes me.
* Hangs 30 seconds into booting, immediately after message: "2.78 Knoppix booting"
* It seems it never detects anything USB (though the USB mouse kinda works later...)
* booting "debug" asks to type exit to continue... nothing responds on the keyboard
* booting "failsafe" makes it all the way to KDE where the mouse (mostly) works, but the keyboard does not.
* booting "expert" fails when it needs KB input to select SCSI drivers.
* booting the {nousb|nousb2|lang=da} all fail.
* booting "knoppix testcd" fails similarly
* booting "failsafe testcd" tests the CD and makes it into KDE as prev. mentioned (though the output of the md5sums was not fully observed, i.e. bathroom break) (bad burn is doubtful, the iso DL is good (as checked by sha1))

ideas:

* ?? I've tried a lot of tweaking and some searching, anyone experiencing similar issues?
  • no bugs as yet :) - hate to rain in your parade ;-)