|
|
Line 1: |
Line 1: |
− | -German Version: [[Network FAQ Deutsch]]
| |
− |
| |
− | -Versión en español: [[Network FAQ Spanish]]
| |
− | ----
| |
− | Return to [[Knoppix FAQ]]
| |
− | ----
| |
| ==== Q: How do I get ADSL with PPTP in austria to work? ==== | | ==== Q: How do I get ADSL with PPTP in austria to work? ==== |
| A: the following instruction should work: | | A: the following instruction should work: |
| http://howto.htlw16.ac.at/at-highspeed-howto-2.html (German) | | http://howto.htlw16.ac.at/at-highspeed-howto-2.html (German) |
− |
| |
− | ==== Q: How do I configure SAMBA or how can i use windows shares? ====
| |
− | A: See [[Smb Client HowTo]] for connecting to windows shares. See [[Samba Quick FAQ]] for setting up a Samba server
| |
− |
| |
− | ==== Q: I have installed to my Hard Drive and how do I connect to internet using DHCP? ====
| |
− | A: The harddisk-installed system is a "normal" Debian. You have to add the following lines to ''' /etc/network/interfaces''' :
| |
− | * auto eth0
| |
− | * iface eth0 inet dhcp
| |
− | re-start the network with ''' /etc/init.d/networking restart''' to have the changes take effect.
| |
− |
| |
− |
| |
− |
| |
− |
| |
− | ==== Q: How do I browse through my Windows network at the office ? Can I log in at an NT domain ? ====
| |
− | A: K-menu > Internet > [[Lin Neighborhood]]. Go to its preferences and specify IP for master server or WINS server. See also Samba info above.
| |
− |
| |
− |
| |
− | ==== Q: How do I use a static IP address with the CD-Rom? How do I modify /etc/hosts and /etc/resolv.conf which are read only files? AFAIK, this is necessary to specify my IP address and my (ISP's) nameservers. ====
| |
− |
| |
− | ===== A: GUI driven configuration =====
| |
− | The read only files are copied into a ram disc upon start up, hence they are easy to edit when root. Several tools are made available for easy configuration. For v3.2-v3.9:
| |
− | K-menu > KNOPPIX > Network/Internet > Network card configuration
| |
− | which is the same same as performing the
| |
− | sudo netcardconfig
| |
− | command from a shell. Fast, easy, automated script:
| |
− | * decline DHCP
| |
− | * enter IP address
| |
− | * accept or edit other default settings
| |
− | * Start firewall
| |
− |
| |
− | ===== A: Manual configuration
| |
− | * start root shell
| |
− | * Specification of nameservers, these should work for anyone as a first hack
| |
− | cat >> /etc/resolv.conf <<EORESOLV
| |
− | nameserver 139.30.8.7
| |
− | nameserver 139.30.8.8
| |
− | <<EORESOLV
| |
− | * Overwrite original network description
| |
− | cat > /etc/network/interfaces <<EOINTERFACES
| |
− | auto lo eth0
| |
− | iface lo inet loopback
| |
− | iface eth0 inet static
| |
− | address /your IP number goes here/
| |
− | netmask 255.255.255.0
| |
− | gateway /and your gateway's address/
| |
− | <<EOINTERFACES
| |
− | * Get things going, lo is going already
| |
− | ifup eth0
| |
− | * Start the fire wall with K-MENU -> KNOPPIX -> Services -> Firewall (someone please give the exact english spellings here)
| |
− |
| |
− | In order to make this persistent with the next reboot, one should create a persistent image o the local changes, suggested is to use a USB stick for such. See K-MENU -> KNOPPIX -> Configuration -> Install permanent image + Save configuration. No data on the USB stick will be overwritten.
| |
− |
| |
− | ----
| |
− | Return to [[Knoppix FAQ]]
| |