Hi all,
I was trying to run knoppix 9.1 off of a flash drive on a Microsoft Surface laptop 1st gen (1782).
Pressing the volume down after pressing the power button boots from the usb, I can get into the bios settings with using volume up after pressing the power button.
It gets as far as telling me what the cpus are, then it says "waiting for usb" and then just stops, and drops to a sh where I can't type anything on the surface laptop's keyboard.
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$275.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
DELL PowerEdge M630 Blade 2x E5-2690v4 2.6GHz =28 Cores 64GB H330 2x10Gb X520
$264.00
744409-001 HPE ProLiant BL460c Gen9 E5-v4 10Gb/20Gb FlexibleLOM Configure-to-
$39.99
HP ProLiant BL460c G9(Gen9) 2x 12 CORE E5-2680v3 2.5GHz 64Gb RAM 2x300Gb HDD
$199.99
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.69
DELL POWEREDGE M630 BLADE SERVER 2X E5-2560 V3 10C 256GB RAM No HDD IDRAC 8 H330
$379.00
DELL PowerEdge M630 Blade 2x E5-2680v3 2.5GHz =24 Cores 128GB H330 2x10Gb X520
$261.00
Dell Poweredge M630 Blade Server 2x E5-2680 v3 2.5ghz 24-Cores / 256gb / H730
$449.99