I have had terrible trouble with 7.4.2 and 8.1.0 on a Dell XPS9360. Whether booting from the KNOPPIX DVD (burn iso) or from a boot USB (I use Pendrive's Universal-USB-Installer v. 1.9.8.0, there may be other or later versions) all I got was a blank screen. But a certain amount of whirring suggested to me that the live version was in fact progressing and available. After a lot of messing about with vga=xxx in the KERNEL stanza in /boot/isolinux/isolinux.cfg I iterated to the best, sparsest and most portable version of this configuration file that I have EVER had. It reads
DEFAULT console
TIMEOUT 40
PROMPT 1
LABEL console
KERNEL linux
APPEND initrd=minirt.gz vga=893 lang=uk 1
LABEL video
KERNEL linux
APPEND initrd=minirt.gz vga=893 lang=uk #
By portable I mean this works on an ancient (really ancient) Samsung, any number of Dells in all configurations / ages, likewise Fujitsus. All screens from 800x600 to 1920x1080.
Still can't get 8.1.0 to work using a boot USB (DVD is fine). The architecture dictated by Pendrive leads to a configuration location error ("Can't find ..") from the very start. Even mimicking the geography of the 7.4.2 boot USB does not mend this.
Fergus
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c G9(Gen9) 2x 10 CORE E5-2660v3 2.6GHz 128GB RAM No SSD
$222.00
Dell PowerEdge M640 Barebone Server Blade No Hard Drive Trays
$499.00
Lot of 9 Cisco UCS B200 M2 Blade Server
$385.00
727021-B21 HP ProLiant BL460c G9(Gen9) E5 10Gb FlexibleLOM CTO Blade Server
$66.00
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.31
DELL PowerEdge M630 Blade 2x E5-2660v4 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$286.00
DELL PowerEdge M630 Blade 2x E5-2683v3 2.0GHz =28 Cores 128GB H330 2x10Gb X520
$290.00