Hello,
I'm booting a board with 7.7.1
This board has 3 DVI display ports, one of them is converted to VGA by hardware.
The board has only one graphic card.
After booting, I can see few boot messages on the VGA output and then, the screen is black.
The display probably goes to another port.
How can I specify the required port in knoppix ?
Thank you,
Zvika
H261-Z61 2U 24SFF AMD Server 8x EPYC 7702 512-Cores 2048GB RAM 8x25G NIC 2x2200W
$13292.18
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
Supermicro E300-8D Xeon D-1518 2.20GHz Mini Server
$574.99
Supermicro CSE 823-6 2U 6 Bay Chassis ,1xPWS 653-2H 650Wsold as in the photo,
$119.75
Sun Fire X4100 2xOpteron AMD 2xx - 16+ GB RAM - 2x300GB SAS drives -RAILS
$100.00
Supermicro 1U X11DPU 2x Xeon Gold 6132 2.6GHz / 128gb / 10x 2.5 Trays / 2x 750w
$649.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00