-
Junior Member
registered user
7.7.1: Redirect to another display port
Hello,
I'm booting a board with 7.7.1
This board has 3 DVI display ports, one of them is converted to VGA by hardware.
The board has only one graphic card.
After booting, I can see few boot messages on the VGA output and then, the screen is black.
The display probably goes to another port.
How can I specify the required port in knoppix ?
Thank you,
Zvika
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell R730xd 26 Port SFF 2x E5-2697v4 36-Cores H730 128GB Server 2x SFP 10G ENT
$490.00
Dell PowerEdge R420 Dual Intel Xeon E5-2440 v2 @1.90GHz 32GB RAM No HDD H710
$74.50
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$172.95
DELL PowerEdge R730 Server 2x E5-2640v4 2.4GHz =20 Cores 32GB H730 4xRJ45
$259.00
Dell PowerEdge R630 Server | 2x E5-2680 V4 =28 Cores | H730 | Choose RAM/ Drives
$321.99
Dell PowerEdge R530 8 BAY, 2 Heatsinks, System Board, H730,Idrac Ent, 2x750w Psu
$150.00
Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w
$359.99
Dell Poweredge R720 2x Xeon E5-2670 v2 2.5GHz 20-Cores / 128gb / 600gb / H710
$249.99