Hello,
I'm booting a board with 7.7.1
This board has 3 DVI display ports, one of them is converted to VGA by hardware.
The board has only one graphic card.
After booting, I can see few boot messages on the VGA output and then, the screen is black.
The display probably goes to another port.
How can I specify the required port in knoppix ?
Thank you,
Zvika
HP ProLiant MicroServer Gen8 G8 G2020T 8GB RAM 4x 1TB HDD 4x 3.5" 712318-421
$269.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
HP ProLiant MicroServer Gen8 Desktop Computer Intel Core i3-3240 8GB Ram
$224.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
DATTO-1000 Mini PC Micro Server 8GB RAM
$67.48
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
HP Proliant HSTNS-5151 Microserver (618364-005) NO HARD DRIVES - WORKS
$149.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00
Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail
$199.00